<b>검색 상세보기 : [SPE]</b> - TurboVap 500, 시료 농축기
Notice

판매개시!
TurboVap® LV • II • EH
All New & All Better!.

new TurboVap 둘러보기

• Gas Vortex Shearing Technology
• End-Point 감지 센서
• Multi Rack: 여러 크기 Tube 수용
• 가스 매니폴드 조절 교체 가능
• 다양한 종료모드: Manual Time Endpoint Endpoint+Time Method

• 7" 컬러 터치스크린 제어판 내장
• 4면이 투명한 유리 수조
• 전면 배수 포트
• 수조 조명과 경보음으로 종료 알림
• 절전모드와 자동 웨이크업

     
 
Home > Product > SPE > Biotage > Instruments

제 품 명 : TurboVap 500, 시료 농축기
제 조 사 : Biotage
제품코드 : C103203
    · 관련자료:Biotage Evaporation Catalog
TurboVap 500 User’s Manual
Evaporation Rates
 
   
상세설명

TurboVap 500 Automated Evaporation System
Sensor Endpoint Detection
Closed Cell Concentrator
No Gas needed
Solvent Vapor Recovery
Advantages
√ Patented Vortex Shearing Technology
√ Patented Sensor Endpoint Detection - no monitoring required
√ Operators are freed to perform other tasks, further improving lab productivity
√ No “bumping” means no re-working of samples, saving you money every week
Solvent vapor recovery system - laboratory emissions can be greatly reduced
√ User-friendly displays and diagnostics
√ Convenient bench top size - no hood space required
√ No need for fume hood
√ Portable - No Gas required applications

Environmental samples
√ Agrochemical samples
√ Forensic and crime samples
√ Drugs of abuse samples
√ Food and beverage analysis
√ Pharmaceutical biotech compounds
√ Clinical samples
√ Remote locations
Ordering Information
Part Number Description Qty
Biotage TurboVap® 500 : 본체 (Evaporation Tube, 보조랙 포함)
C103203 TurboVap 500, 200/220V, 50/60Hz 1
 
Evaporation Tube : 추가구매 품목
C128510 Evaporation Tube, 500 mL, 0.5 mL Endpoint, 2/pk 1 pk
C128515 Evaporation Tube, 500 mL, 1 mL Endpoint, 2/pk 1 pk
C128514 Evaporation Tube, 500 mL, Flat Bottom, 2/pk 1 cs
 
Accessories
C45400 Auxiliary Rack (500ml, 2 positions) for TurboVap 500 1
C45412 Glass Cover : 500 mL sample tube용, 2/pk 1 pk
 
필수 준비 품목 : 필수 준비 품목
Condenser coolant supply 또는 찬 수도물
 
Technical Specs
Number of samples 2
Water bath remperature Ambient to 95 °C. (Upper temperature with sensors is 60°C)
Timer range 1–99 minutes
Power requirements 110/120 VAC at 60 Hz (European, 230 VAC at 50 Hz) 900 VA max
Net weight 42 lbs. (18.6 kg)
Shipping weight 60 lbs. (27.2 kg)
Dimensions 21.2” x 24” x 11.9”
Maximum sample volume 500 mL
Evaporation rate Adjustable based on water bath temperature, fan speed and chille
Final endpoint volumes Selectable. Automatic endpoints of 0.5 mL and 1.0 mL or dryness.
Solvent reclamation 95% of solvent vapors under typical conditions
Technology Gas vortex shearing technology
Gas supply requirements Internal fan, 4000~8000 rpm, No external gas required
Exhaust
Minimum operating pressure No gas required
Certifications 2006/95/EC Low Voltage Directive 2004/108/EC EMC Directive 93/68

TurboVap® 500 Concentration Evaporator Workstation is a closed cell evaporation system that provides automated sample concentration and solvent recovery using a helical gas flow and sensor endpoint detection technology.

TurboVap® 500 can evaporate volumes up to 500 mL down to complete dryness with flat bottomed vessels or to a selectable endpoint at 0.5 or 1 mL. A water bath is used to maintain stable temperature, while the cooled glassware condenser collects the solvent. The condenser technology allows for efficient and cost effective collection of hazardous waste. It also prevents losses of samples and allows for analysis to detect cross-contamination issues.

The “helical flow” of air is created by a motor-driven fan. The solvent vapors rise and enter the condenser, condense on the side walls, then run out the drain into a suitable waste or reclamation container. The two position unit accommodates 500 mL vessels with either 0.5 mL or 1.0 mL endpoint stems. Biotage delivers the most efficient and rapid solvent evaporation systems for chemistry laboratories around the world.

Applications
In environmental laboratories, concentration of large samples is often a time consuming process. TurboVap 500 efficiently concentrates organic solvent extracts to 0.5 or 1.0 mL and sounds an alarm when finished. This "load and leave" capability frees the analyst for more important work.

TurboVap® 500 is also an excellent alternative to traditional rotary evaporators used in organic synthesis. With a 500 mL solvent capacity and water bath temperatures up to 95 ºC, synthesis mixtures are processed quickly. The unique vortexing action maintains the components of interest in the solvent during evaporations and minimizes the “plating” of the compounds on the vessel walls. The open top cylindrical design of the sample tube, with a small stem at the bottom, provides an easy way to recover the products of interest when the evaporation is completed.

TurboVa 500
TurboVa 500
TurboVa 500
 

Map
Anyang Mega Valley RM 819, 268, Hagui-ro, Dongan-gu, Anyang-si, Gyeonggi-do, Republic of Korea 14056
【Tel】+82-(0)2-571-3444 【Fax】+82-(0)2-571-4877
【email】 jys@jysco.com

Copyrightⓒ ㈜장영실 JYSCO Co., Ltd. All Rights Reserved.